Frequently Asked Questions (FAQs)

Q1. Do you have a minimum order requirement to buy direct from the factory?

A. Yes, 35,000 bullets. You can mix and match any way you like to get to an order of that size. If this requirement is too large, please contact one of our many national or international distributors, which can be found in the “Where To Buy” section of our website.

Q2. Do I need an FFL to buy direct?

A. No

Q3. Do your bullets have any velocity restrictions?

A. In general, our bullets typically perform their best when shot at velocities no greater than 1,200 to 1,250 Feet per second (FPS).

Q4. What type of crimp should I use?

A. A slight taper crimp is what we recommend, for example as delivered by a Lee Factory Crimp or similar die.

Q5. Why are there no cannelures on any of your bullets?

A. Because our bullets are so soft a cannelure groove is not needed to achieve a positive, tight grip of the bullet in the case mouth.

Q6. Do you offer loading data for Rainier bullets?

A. Loads for copper jacketed bullets can be used for Rainier copper plated bullets. We recommend a starting powder charge directly between the listed minimum and maximum load.

Shane HallFrequently Asked Questions (FAQs)