Sometimes we can lose the combination to a safe and need to open it without a key. Losing the combination to your safe is a frustrating experience. Call a locksmith immediately if your safe doesn’t have a key, and you’re locked out of it.
The locksmith will either be able to open it for you or provide advice on how to get into it yourself. Of course, you can break in, but this is not recommended. But this will cost you a lot of money, and not all of us can afford to hire a locksmith.
So, how do you open a safe without a key and combination on your own? There are a couple of ways to do it. And that is what I will be discussing here in this article.
Top 4 Methods For Opening A Safe Without Key Or Code
You can keep your most beloved items safe from all kinds of threats with a sturdy safe. Just make sure you don’t lose the combination to your safe.
It’s okay if you lose it. Even if you forget the combination, you can still open a safe. Just follow these steps.
Method #1: Breaking Your Safe By Dropping Or Bouncing It
Though this may seem odd, many safe owners claim they can reset the lock by dropping the safe from a safe distance. If you’ve lost your safe key and forgotten its combination, you can perform this hack. Simply follow these steps:
- Make sure that the surface you intend to drop the safe on is protected by a cloth.
- Place your left hand on the backside of the safe and your right hand on the front.
- Hold it approximately two feet from the surface.
- It’s supposed to fall now so that it can release the door.
- You will need to drop the safe several times before the door opens.
- Do not drop the safe from a height that could permanently damage or destroy it.
- To release the door of the safe, smack a hammer carefully above the solenoid where it’s located if dropping it doesn’t work.
Explore the other options below if the above method does not work.
Method #2: Using A Rare Earth Magnet To Open Your Safe
Solenoids are commonly found in electronic safes, especially those designed to hold firearms. The solenoid is the battery that controls the lock mechanism of the safe.
A strong rare earth magnet, such as a Neodymium magnet, can be used to reset this material. Magnets of this type can normally be found at hardware stores or online retailers such as Amazon.
Rare earth magnets are extremely powerful and should be handled carefully. In addition, you should not use one if you have a pacemaker and should not carry it close to electronic devices or household utensils.
You won’t want to put your finger between the magnet and the safe, because you could get hurt. Placing the rare earth magnet inside of a sock and attaching it to the left-hand corner of the safe will allow you to open it.
The solenoid is located on the right side of the safe. Move slowly toward it and continue to do so until you find it.
It takes patience to do this but as soon as a magnet contacts the solenoid; the safe will open. If you’ve forgotten the combination to your safe, you can easily hack it with a rare earth magnet.
Method #3: Using A Nail File To Open Your Safe
A nail file can also pick your safe’s lock, similar to the paper clip method. Your nail file will need to go through the keyhole in this case. Wobble the file around a bit in the keyhole, press the pins, and finally listen for that ‘click’ sound.
You must turn the file clockwise once you hear the clicking noise to get the lock to turn and open the safe. This option, too, will require some patience and time to complete, just like the paperclip method.
Method #4: Using A Paperclip To Open A Safe
You’ve probably seen paper clips used in many movies to pick locks. In addition, there may be a manual override keyhole on the back of the safe if the keyhole is not on the front.
If you own a digital safe, this is especially true. If you have forgotten your passcode and do not have your manual override keys, you can use a paperclip. A paper clip can be used to open your safe if it is straightened and inserted into the keyhole.
Attach a second paperclip underneath the first one or use a small screwdriver to anchor and help turn the lock. Pick the lock slowly and search its mechanism using the first paperclip.
Your goal is to create a clicking sound that indicates your success. Once that happens, you can turn the lock and open the safe. It takes a considerable amount of time and patience to achieve this option.
How To Open A Digital Safe Without Combination?
For a digital safe, here are the steps:
Emergency keys are available on some digital safes. Nevertheless, if it does not, you will need to reset it. In order to do so, find the bolt openings on the safe. You can usually find them on the back of the safe. The bolt opening may be on the base of some smaller digital safes.
Take a flashlight and shine it through each of your safe’s bolt openings after you have located them. Until you can clearly see the interior keypad of the safe, you need to move from one bolt opening to another.
After locating the keypad inside your safe, find a thin and long rod that fits through the corresponding bolt hole. The best option is to use an uncoiled wire hanger, but whatever works as long as it does the job.
Press the “reset” button on the interior keypad of the safe after inserting the rod. The button may need to be held down for about ten seconds. Hit the “set” button on the safe’s interior keypad to set your new combination.
When a new combination has been set, most digital safes will emit a beeping noise. If you do not hear one, the “set” button must be held down. Assume that your code has been set if ten seconds go by without a sound.
Take out the rod from your safe. Verify your safe’s exterior keypad is set up correctly by entering your new combination there. You will have to take your rod and open your safe again if your safe fails to open.
How To Open A Dial Safe Without Combination?
Follow these steps to open a dial safe:
Your first task is to locate the emergency key for the safe. Your safe almost certainly came with an emergency key.
Let’s hope you can find it in time, because without it, you won’t be able to open the safe. If not, you’ll have to force the safe open.
Take off the dial cover on your safe. Dial panels are usually easy to remove with just your hands. Using a fork or similar tool to pry the panel off the dial is not recommended and may cause damage to the exterior of your safe.
Take a look beneath the dial itself once the dial panel has been removed. Look for a small round notch under the dial. You will find the emergency keyhole here.
It may be difficult to notice the emergency keyhole at first since it blends in with the safe.
Although not all manufacturers place the emergency keyhole under the dial, this is something worth keeping in mind. The emergency keyhole might be located on the side of your safe dial.
The emergency key should be inserted into the emergency keyhole and turned until the safe opens.
Prior to removing the key, make sure it is placed back in its original location. Failure to do so may result in the safe not locking properly or the emergency key not working the next time you need it.
How Do You Open A Winchester Safe Without Combination?
Winchester safes have a combination locking system and require a code to open. You can unlock your safe if you’ve forgotten your combination or for any other reason have been locked out.
There is no way to easily break into or open these types of safes because they are designed for maximum security. However, if you need to override the lock, you can do so with the override key that comes with every Winchester safe.
You can reprogram the code by overriding the lock with the key and opening the safe. Consider spending some money to request a replacement key and combination online through the manufacturer if you’ve lost them both.
However, Winchester does provide replacement keys free of charge for a limited time after purchase. Check your eligibility by providing them with your safe’s serial number and model.
How Do You Open a Stack-On Safe Without Key?
If you’ve forgotten your stack-on safe combo and lost the key, check if you have a backup key. A stack-on electronic safe comes with a backup key that can be inserted into a slot beneath the electronic keypad in the place of most combination lock safes.
You can, however, obtain a replacement key from the manufacturer if you have not been able to locate your backup key. There are several steps involved in requesting new keys, and there is often a limited amount of keys available based on the safe’s model.
The following methods can also be used to open your stack-on safe:
- Make An Attempt To Pick The Lock
If the lock cannot be picked, you may use a nail file, paper clip, or another picking tool. Unfortunately, you can also cause damage to your safe if you’re unfamiliar with picking locks.
- Bypass The Lock With A Drill
Although this option is effective, it also damages your safe permanently. Drilling through the lock will break it and let you open it. It is possible to replace the lock on a safe after it has been damaged if you want to continue using it.
- Hammering At It
The locking mechanism on your safe may also need to be hammered repeatedly in order to open it.
The anchor holding the locking bar in place may become loose as a result of repeated hammering. Stack-on safes can be permanently damaged in this way as well, as with the method above.
- Prying It Open
Safes of this type are not airtight, so a strong rod would need to be inserted into the locking area to pry it open. If you pry open the safe, you will break the locking mechanism, and the safe will no longer serve its original purpose.
Note From The Author
It can be difficult to open a safe without the correct combination. Nevertheless, it’s not impossible. The methods above have been tested and proven. You can also take the safe to a locksmith if all else fails.
In that case, a locksmith can help you if you have forgotten the combination to your safe. There are pros and cons to taking your safe to a locksmith.
Compared to the DIY methods outlined above, it is far less time-consuming. It is good to hire a locksmith if you are pressed for time or if the job is difficult.
Locksmiths are expensive to hire, so it is important to keep this in mind. Thus, you need to be prepared to spend a lot of money in order to open your safe. Unfortunately, locksmiths also employ a wide range of destructive techniques that permanently damage the safes.
Whenever possible, try opening the safe yourself. Despite the additional time and effort, the process is much more cost-effective than contacting a locksmith.
If you forget your passcode, many digital safes come with a key that you can use to unlock them manually. In the event that you forget your passcode and lose the key to your safe, what should you do?
You’ve come to the right place if this describes your current situation. It is not a big deal, as this is a very common issue, and there are a number of solutions you can use to get your safe opened.
If you don’t have the key or code, you can use household items such as paper clips, nails, and screwdrivers. An electronic safe can be opened without a safe or code if a rare earth magnet is used, but it can also damage other electrical objects in the home.
The safe will open if you drop it or bounce it if you lose the key or have the manufacturer replace the key. Hopefully now you know how to open a safe without a key or combination.