Loading Data

We, at Rainier Ballistics, recommend using lead bullet load data when loading our bullets. There is no need for adjustment when using lead bullet load data. Our bullets are jacketed using an electroplating process and are softer than traditionally jacketed bullets; hence the recommendation to use lead bullet load data.

***If you only have access to traditionally jacketed load data, we recommend a starting powder charge directly between the listed minimum and maximum load, and you may use published load data found in reputable reloading manuals.

A slight roll or taper crimp may be used with our bullets;

Overcrimping plated bullets may result in decreased accuracy, and fragmentation of copper plating.